SBI-7428R-C3 is a compact self-contained server that connects into a pre-cabled enclosure that provides power, cooling, management and networking functions. One enclosure for the SBI-7428R-C3 blade module can hold fourteen blade units.

The SBI-7428R-C3 blade module supports dual 2011-pin (LGA 2011 Socket R3) Intel Xeon E5-2600 v3 series processors. The SBI-7428R-C3 blade module has sixteen (16) 288-pin DDR4 DIMM sockets that can support up to 256 GB of 16 GB, 8 GB or 4 GB VLP RDIMM size, 2133/1866/1600 MHz speed SDRAM. Memory is interleaved, which requires modules of the same size and speed to be installed in groups (of two or three).

The SBI-7428R-C3 blade module can have three 2.5" Hot-swap HDD/SSD/NVMe SAS3 hard disk drives in front-mounted easy removable carriers.

A maximum of fourteen blade modules may be installed into a single blade enclosure. Each blade enclosure is a 7U form factor, so a standard 42U rack may accommodate up to six 14-blade enclosures with 84 blade modules, or the equivalent of 84 1U servers. With the inclusion of six CMM modules, twelve Gigabit Ethernet switches and six InfiniBand switches, this would occupy up to 108U space in a conventional 1U server configuration.

Features

• 168 CPUs per 42U Rack
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 (LGA 2011) with 2x Intel QPI 1.1 channels up to 9.6 GT/s
• Intel® C612 Express chipset
• Up to 256GB VLP ECC RDIMM; 16 DIMM
• Intel® i350 Dual port Gigabit Ethernet
• IPMI 2.0, KVM over IP, Virtual Media
• FDR-10/QDR InfiniBand or 10GbE mezzanine HCA
• 3x 2.5" Hot-swap HDD/SSD Bays
• SAS3 via LSI 3108; HW RAID 0, 1, 5
• Graphics: Aspeed AST2400 BMC