The SuperServer 1028R-WC1RT is a high-end server based on the SC116AC-R706WBP 1U rackmountable chassis and the X10DRW-iT dual processor serverboard.

The SuperServer 1028R-WC1RT is built around the X10DRW-iT, a dual processor serverboard based on the Intel PCH-C612 chipset and designed to provide maximum performance. The X10DRW-iT supports single or dual Intel® Xeon E5-2600v3 Series processors.

The X10DRW-iT has sixteen (16) DIMM slots that can support up to 1024 GB of ECC RDIMM or LRDIMM DDR4 2133/1866/1600/1333 MHz speed memory in 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB and 64 GB size @ 1.2V voltage.

A SATA controller is also integrated into the chipset to provide up to ten SATA 3.0 (6/Gbps) ports, which are RAID 0, 1, 5, 10 supported. The SATA drives are hot-swappable units.

The SAS/NVMe/SATA backplane (BPN-SAS3-116A-N2) can support SAS devices with a SAS RAID/HBA add-on card. NVMe support can be added with and additonal add-on card (AOC-SLG3-2E4) and two additional data cables (CBL-SAST-0590) for an additional two NVMe drives.

The X10DRW-iT has one (1) SMC-proprietary PCI-E 3.0 x16 slot, one (1) SMC-proprietary PCI-E 3.0 x16+x16 slot, and one (1) PCI-E 3.0 x16 Add-On-Module (AOM) slot for a mezzanine HBA card. PCI slots are controlled by CPUs: both CPUs must be installed to utilize all slots.

Features

• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
• 2x PCI-E 3.0 x16 (FHHL) slots
• 10x Hot-swap 2.5" SAS/SATA HDD bays
• SAS3 (12Gbps) via LSI 3108
• Intel® X540 Dual port 10GBase-T
• I/O ports: 2x SuperDOM, 1x VGA, 1x COM, 6x USB 3.0 (4 rear, 2 front)
• Optional 2x 2.5" NVMe drives support
• 700W Redundant Power Supplies Platinum Level High-efficiency