A SuperServer 1028U-TNRTP+ is a high-end server comprised of two main subsystems: the SC119UAC(2)-R750 1U server chassis and the X10DRU-i+ dual processor serverboard.

At the heart of the SuperServer 1028U-TNRTP+ lies the X10DRU-i+, a dual processor serverboard based on the Intel PCH C612 chipset. Below are the main features of the serverboard. The server supports single or dual Intel E5-2600v3 Series processors in R3 LGA 2011 sockets. The server features 24 DIMM slots that can support up to 1536 GB of ECC Load Reduction (LRDIMM) or up to 768 GB of ECC Registered (RDIMM) DDR4-2133/1866/1600/1333 SDRAM.

A SATA controller is integrated into the chipset to provide a ten-port SATA subsystem. Six of the ports are supported by the Intel PCH and four of the ports are supported by the Intel SCU. The SATA 3.0 ports are connected to the backplane by default. RAID 0, 1, 5 and 10 are supported by Intel RSTe Software RAID.

The system comes with basic I/O ports for VGA, COM, five USB 3.0, and one IPMI connection. In addition, there are several possible networking configurations depending on the pre-installed Ultra riser card.

A SuperServer 1028U-TNRTP+ is a high-end server comprised of two main subsystems: the SC119UAC(2)-R750 1U server chassis and the X10DRU-i+ dual processor serverboard.

Features

• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
• 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
• 2x 10G SFP+ ports
• 10x Hot-swap 2.5" Drive Bays: Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports; Optional 8x SAS3 ports via AOC
• 5x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+))