The SuperServer 2028R-C1R is a server comprised of two main subsystems: the SC213AC-R920LPB 2U server chassis and the X10DRH-C dual processor serverboard. The SuperServer 2028R-C1R features four 10GBaseT LAN ports.
The SuperServer 2028R-C1R is built around the X10DRH-C, a dual processor serverboard based upon the Intel C612 Express chipset. Each serverboard supports single or dual Intel Xeon E5-2600 V3 processors in Socket R3-LGA 2011.
Each serverboard has 16 DIMM slots that can support up to 1 TB of Load Reduced (LRDIMM) ECC registered memory or up to 512 GB of registered (RDIMM) ECC modules. Memory type is 2133/1866/1600 MHz DDR4. 72-bit. DIMM sizes supported are RDIMM: 32 GB, 16 GB, 8 GB, 4 GB; LRDIMM: 64 GB, 32 GB.
An LSI 3108 SAS controller is included on the serverboard to support up to eight SAS 3.0 ports with RAID 0, 1, 5, 6, 10, 50 and 60. The SAS drives are hot-swappable if you set up RAID. A SATA controller is integrated into the C612 chipset to provide ten SATA 3.0 ports, with RAID 0, 1, 5 and 10. The SATA drives are hot-swappable if you set up RAID.
The serverboard has a total of seven PCI-E 3.0 slots: six x8 slots and one x16 slot. Note that both CPUs must be installed to make use of all the PCI slots. CPU1 controls Slot1-Slot3; CPU2 controls Slot4-Slot7.