The SuperServer 2028U Series is a high-end server comprised of two main subsystems: the SC219UAC(4)-R1K02 2U server chassis and the X10DRU-i+ dual processor serverboard.

At the heart of the SuperServer 2028U Series lies the X10DRU-i+, a dual processor serverboard based on the Intel PCH C612 chipset. The serverboard supports single or dual Intel E5-2600v3 Series processors in LGA2011 sockets.

The serverboard has 24 memory sockets that can support up to 768 GB of ECC registered DDR4-1600/1333/1066/800 non-volatile RDIMM (Registered DIMMs) or 1536 GB of LRDIMM (Load-Reduced DIMMs) DDR4-2133/1866/1600/1333 memory. A SATA controller is integrated into the chipset to provide a ten-port SATA subsystem. Six of the ports are supported by the Intel PCH and four of the ports are supported by the Intel SCU. The SATA 3.0 ports are connected to the backplane by default. RAID 0, 1, 5 and 10 are supported by Intel RSTe Software RAID.

The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports and a dedicated IPMI LAN port. In addition, there are several possible networking configurations depending on the pre-installed Ultra riser card

The SuperServer 2028U Series is a high-end server comprised of two main subsystems: the SC219UAC(4)-R1K02 2U server chassis and the X10DRU-i+ dual processor serverboard.

Features

• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
• 6x PCI-E 3.0 x8 slots (4x FH, 10.5" L, 1x LP, 1x Internal LP)
• 4x 10GBase-T ports
• 24x Hot-swap 2.5" Drive Bays: Default 8x SATA3 ports and 4x NVMe ports; Optional 24x SAS3 ports via AOC
• 4x heavy duty fans w/ optimal fan speed control
• 1000W High efficiency (96%) Redundant PSU; Titanium Level