Product Details
The FatTwin F618R2-FTPT+ is a server comprised of two main subsystems: the F418IF2-R2K04BP 4U server chassis and the X10DRFF-iTG dual processor serverboard in eight hot-swap nodes.
At the heart of the FatTwin F618R2-FTPT+ lies the X10DRFF-iTG, a dual processor serverboard based on the Intel® C612 chipset and designed to provide maximum performance. Eight of these serverboards can be mounted in the F418IF2-R2K04BP chassis.
The X10DRFF-iTG supports single or dual Intel® Xeon® E5-2600 v3 family processors (Socket R3 LGA 2011). Each processor supports four full-width Intel QuickPath Interconnect (QPI) links, with support of up to 25.6 GT/s per QPI link and with Data Transfer Rate of up to 9.6 GT/s per direction.
Each X10DRFF-iTG serverboard node has sixteen (16) DIMM slots supporting up to 1 TB of LRDIMM registered ECC or up to 512 GB of RDIMM ECC at DDR4-2133/1866/1600 MHz speeds and up to 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.2V voltages.
A Serial ATA controller is integrated into the C612 to provide up to ten (10) SATA 3.0 connections, including six (6) SATA 3.0 ports supported by Intel PCH (I-SATA 0-5) and four (4) SATA 3.0 with 4 connections supported by the PCH (S-SATA 0-3). These drives support RAID 0, 1, 5 and 10 capabiltiy. The SATA drives are hot-swappable units. Each node in the FatTwin F618R2-FTPT+ server has 1x PCI-E 3.0 x8 and 1x PCI-E 2.0 x4 (in x8) low-profile slots available for the node.
Features
Screenshots