Product Details
The FatTwin F628G3-FC0PT+ is a high-end server comprised of four main subsystems: the F424AG-R2K04BP 4U server chassis and the X10DRFF-CTG dual processor serverboard in four hot-swap nodes.
At the heart of the FatTwin F628G3-FC0PT+ lies the X10DRFF-CTG, a dual processor serverboard based on the Intel® C612 chipset and designed to provide maximum performance. Four of these serverboards can be mounted in the F424AG-R2K04BP chassis.
The X10DRFF-CTG supports single or dual Intel® Xeon® E5-2600v3 series processors (Socket R3 LGA 2011). Each processor supports four full-width Intel QuickPath Interconnect (QPI) links, with support of up to 25.6 GT/s per QPI link and with Data Transfer Rate of up to 9.6 GT/s per direction.
Each X10DRFF-CTG serverboard node has sixteen (16) DIMM slots supporting up to 1 TB of LRDIMM registered ECC or up to 512 GB of RDIMM ECC at DDR4-2133/1866/1600 MHz speeds and up to 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB or 64 GB size at 1.2V voltages.
A Serial ATA controller is integrated into the C612 to provide up to ten (10) SATA 3.0 connections, including six (6) SATA 3.0 ports supported by Intel PCH (I-SATA 0-5) and four (4) SATA 3.0 with 4 connections supported by the PCH (S-SATA 0-3). These drives support RAID 0, 1, 5 and 10 capabiltiy. The SATA drives are hot-swappable units.
Each of the and serverboards contains an integrated LSI® LSI 3008 SAS3 controller that provides up to an eight port 12 Gb/s SAS3 (Serial Attached SCSI) supported subsystem (SAS 0-3, 4-7). These provide the system with a RAID 0, 1 and 10 capability. The SAS drives are hot-swappable units.
4 Hot-plug System Nodes in 4U Front I/O. Each node supports:
Screenshots