The FatTwin F628G3-FTPT+ is a server comprised of four main subsystems: the F424AG-R2K04BP 4U server chassis and the X10DRFF-iTG dual processor serverboard in four hot-swap nodes.

The X10DRFF-iTG supports single or dual Intel® Xeon® E5-2600 v3 family processors (Socket R3 LGA 2011). Each processor supports four full-width Intel QuickPath Interconnect (QPI) links, with support of up to 25.6 GT/s per QPI link and with Data Transfer Rate of up to 9.6 GT/s per direction.

Each X10DRFF-iTG serverboard node has sixteen (16) DIMM slots supporting up to 1 TB of LRDIMM registered ECC or up to 512 GB of RDIMM ECC at DDR4-2133/1866/1600 MHz speeds and up to 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.2V voltages.

A Serial ATA controller is integrated into the C612 to provide up to ten (10) SATA 3.0 connections, including six (6) SATA 3.0 ports supported by Intel PCH (I-SATA 0-5) and four (4) SATA 3.0 with 4 connections supported by the PCH (S-SATA 0-3). These drives support RAID 0, 1, 5 and 10 capabiltiy. The SATA drives are hot-swappable units.

Features

• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
• 3x PCI-E 3.0 x16 slots (support 3x Double-width GPU/Xeon Phi cards), 2x PCI-E 3.0 x8 slots
• Front I/O ports: 2 10GBase-T, 2 USB 3.0 and 1 VGA connector
• Built-in Server management tool (IPMI 2.0, KVM/media over LAN) w/dedicated LAN port
• 2x 3.5" Hot-swap SATA3 HDDs
• 2000W High efficiency (96%) Redundant PSU; Titanium Level