The SuperStorage Server 2028R-ACR24H is a high-end server comprised of two main subsystems: the SC216BAC-R920LPB 2U server chassis and the X10DRH-iT dual processor serverboard.

The 2028R-ACR24H is built around the X10DRH-iT, a dual processor serverboard based on the Intel C612 chipset. The X10DRH-iT supports single or dual Intel® Xeon E5-2600 (v3) Series processors.

The X10DRH-iT has 16 DIMM slots that can support up to 1 TB of Load Reduced (LRDIMM) or 512 GB of Registered (RDIMM) ECC DDR4-2133/1866/1600 memory. An LSI 3108 controller card is included in the system to support up to 240 SATA 3.0/SAS 3.0 hard drives. The SATA/SAS drives are hot-swappable units. A SATA controller is integrated into the chipset to provide 10 SATA 3.0 (6/Gbps) ports (I-SATA0-5 supported by the Intel PCH and a vertical 4-port S-SATA connection supported by the Intel SCU), which are RAID 0, 1 and 10 supported. The SATA drives are hot-swappable units. (RAID 5 supported with Windows OS only.)

The X10DRH-iT has six PCI-Express 3.0 x8 slots (CPU1 Slots 1-3 and CPU2 Slots 5-7) and one PCI-Express 3.0 x16 slot (CPU2 Slot4). PCI slots 1, 2 and 3 are occupied by hardware RAID controllers (AOC-S3108L-H8IR-16DD. The rear I/O ports include one COM port, a VGA port, four USB (two USB 3.0 and two USB 2.0), two 10G (TLAN) Ethernet ports a dedicated IPMI LAN port. A UID (Unit Identifier) button and LED are also located beside the VGA port.

Features

• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
• 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8 (slot 1-3 occupied by controllers
• Dual 10GBase-T LAN w/ Intel® X540
• 24x 2.5" Hot-swap SAS3/SATA3 direct attached drive bays; 2x 2.5" optional hot-swap drive bays (rear)
• SAS3 via 3x LSI 3108 AOC (HW RAID)
• Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
• 3x 8cm hot-swap redundant PWM fans
• 920W Redundant Power Supplies Platinum Level (94%)